Une question ? 
These machines are used to produce flat grids, with configurable sizes of less than 2200 mm wire direction and 3500 mm direction of support (standard version).
They produce grids very suitable for architecture with a wire perpendicular to the supports (aspect).The size of the panels is programmable thus reducing the losses of materials.
The cross wire are fed from spools, straightened and cut to length.
Depending on the range of machines it is possible to use supports between (2 mm / 3 mm) to (40 mm / 5 mm) with profiles between (1.52 mm) / 2.54 mm) at (6mm / 10m) in adequacy with the support.
The cross wire are fed from spools, straightened and cut to length.
Depending on the range of machines it is possible to use supports between (2 mm / 3 mm) to (40 mm / 5 mm) with profiles between (1.52 mm) / 2.54 mm) at (6mm / 10m) in adequacy with the support.
The slot or visual rendering (architecture) is between 300 μ to several tens of mm.
Descriptif complet
